Architecture - Civil Engineering


PORTFOLIO IN 2018

  Design & Build - Gantry Crane

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a steel structure for 2-ton gantry crane. This structure is using SNI, ANSI/AISC, EN, LRFD, and JRA as specifications and used to lift heavy loads.

(2018)

Silo Foundation Design  

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a silo foundation. This structure is using SNI as specification and used as bulk material storage.

(2018)

  MEP Modeling

(From: PT. Alien)

Producing Mechanical, Electrical, and Plumbing (MEP) Modeling, Shop Drawing, and As Built Drawing with Building Information Modeling (BIM) system as a reference for implementation in the field.

                       (2018)

Design & Build - Shopoffice (Rukan)

Interior design and 3D modeling of a shopoffice.

(2018)

  Rice Mill Pre-Engineered Building Design

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a PEB steel structure for rice mill buildings. This structure is using SNI, PPURG, ANSI/AISC, EN, LRFD, and JRA as specifications and used as rice mill factory.

                       (2018) 

Coffee Shop Design

Interior design and 3D modeling of a coffee shop.

(2018)  

Architectural Design of Office Building 

Planning (Basic drawing, Detailed Drawing, Bill of Quantity, and Cost Budgeting) of Architectural of 5 story office building.

(2018) 


Carport

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for carport structure with additional solar panel load and the code uses are SNI, ANSI/AISC, and JRA.

(2018) 


Warehouse Capacity Checking with Additional Solar Panel

Planning (Basic drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for Factory such as warehouse structure, mesh renovation, enterance gate, road access, and bridge.and the code uses are SNI, ANSI/AISC, and JRA.

(2018)


Temporary Bridge Design
(From PT.TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for temporary bridge structure with a 40-meter span. The design consists of superstructure and substructure, and the code uses are SNI, ANSI/AISC, and JRA.

(2018) 


PORTFOLIO IN 2017

  Design & Build - Oil Storage

(From: PT. I)

Design and build an oil storage.

(2017)

Factory Lighting Design  

Highbay lamp plan and installation for factory lighting.

(2017)  

  Hard Coat Renovation

Acrilyc wall and sandwich panel installation in hard coat room.

                         (2017)

Floor Screed  

Plastering and floor screeding.

(2017)

 

  Wind Pipe and Water Pipe Extension

(From: PT. I)

 Wind pipe and water pipe extension and dismantle work.

(2017)

Design & Build - Rail Molding  

(From: PT. I)

Design and build a concrete structure for horizontal molding using H-steel. This structure is using SNI as specification.

(2017)

  Design & Build - PIT Structure 1300 ton

(From: PT. I)

Design and build a concrete structure and dynamic foundation for a PIT 1300 ton machine based on ACI - Foundation for Dynamic Equipment Specification and SNI.

(2017)

Design & Build - PIT Structure (Anti Fog)

(From: PT. I)

Design and build a steel structure for an Anti Fog machine. This structure is using SNI and ACI as specifications.

(2017)

  Additional Roof Design

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a concrete structures for grinder & bunker and steel structures for mounting conveyor & bark crusher building part. This structure is using SNI, PPURG, ANSI/AISC, EN, ACI, LRFD, and JRA as specifications.

                        (2017)

BMC Room Dismantle & Re-layout  

(From: PT. I)

Inspection activity for warehouse and fabrication shop building, the activity such as building measurement, correlation between planning and application, and inspection report.  

(2017) 

Building Inspection Activity

(From: PT. T)

Inspection activity for warehouse and fabrication shop building, the activity such as, building measurement, correlation between planning and application, and inspection report.

(2017) 

`

Factory Design and Renovation 

Planning (Basic drawing, detail drawing, Bill of Quantity, and Calculation Report) for Factory such as warehouse structure, mesh renovation, enterance gate, road access, and bridge.

(2017) 


Ground Water Tank Planning

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) a combined matt foundation with a retaining wall with a depth of 18 m, it is designed to withstand the dynamic soil pressure caused by the earthquake (mononobe method) and hydraulic pressure

(2017) 

`

House Building Inspection 
From: PT. SF )

- Weekly Inspection Activity, for checking and make sure to check and ensure corelation planning and implementation, giving advice about HSE (Health, Safety, Environment) and Schedule management. Made weekly inspection report as evaluation material for owner.

(2017) 


Retrofitting Base Plate & Anchorage Design

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for base plate and anchorage reinforcement calculation, without making any destructive causes in the existing pedestal.

(2017) 


Bark Chute Conveyor Structure & Foundation Planning
(From: PT. TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) the additional steel structure for sub chute conveyor staging that has a function as a channel for waste material from the main conveyor. The structure material uses steel pipe with 14m height and 68-degree inclination. Supported by reinforcement concrete spread foundation. The code uses are SNI, PPURG, ANSI/AISC, ACI, and JRA.

(2017) 


Log Watering Tower

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for a support structure for log watering stage planned as steel structure. The code uses are SNI, PPURG '87, ANSI/AISC, ACI, JRA.

(2017) 



Pipe Rack Planning
 

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) bridge for pipe staging, designs with truss model and direct foundation. The code uses are SNI, PPURG 1987, ACI, and JRA.

(2017) 


Warehouse Design

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) Planning for warehouse structure with hoist crane using steel structure. The code uses are SNI, PPURG 1987, ANSI/AISC, and JRA.

(2017) 

Odoo image and text block
Restaurant Architecture Renovation
(From S-Hotel)

Design and Rebuild a Restaurant of Hotel in Cikarang - Bekasi

(August 2017) 


PIT Structure 1600 Ton
(From: PT. I)

Producing Shop Drawing, As Built Drawing, Bill of Quantity and other material to support Foundation Structure Construction for Up to 1600 Ton Weight Heavy Machine.

(April 2017) 

Odoo text and image block
Odoo image and text block

Hoist Crane Design

(From: PT. I)

Hoist Crane Redesign for factory in MM2100 Industrial Town. Bekasi - West Java.

(April 2017)

PIT. Structure for Shibaura Machine

(From: PT. I)

Producing Shop Drawing, As Built Drawing, Bill of Quantity and other material to support Foundation Structure Construction for Shibaura Machine.

(July 2017)

Odoo text and image block
Odoo image and text block


Excavator Stage & Foundation Planning
(From: PT. TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) the dynamic foundation for excavator stage which categorized as heavy vibration. Tabletop foundation type is used based on ACI specification, and another code uses are SNI, PPURG, ANSI/AISC, and JRA.

(2017) 

As Built Drawing Consultancy

(From: K - Hotel) 

Producting As Build Drawing Architectural and Structural, Analysis the capacity of existing hotel building with 7 story building and 2 basement with earthquake based analysis (SNI 2012), to get existing structural and architectural data, structural data measurement and architectural skecth directly, to get the characteristic of conrete material, Non-Destructive Test (NDT) methode are used. The above data uses as IMB requirements.

( 2017)



Drying Room 

(From: PT. Sp)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) additional structure above the existing drying room for office space requirements, code uses SNI, PPURG, ANSI/AISC, ACI.

(2017) 

Construction Planning of Masjid Dieng

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a mosque. This structure is using SNI and PPURG as specifications. The scope of the analysis consists of roof structure, column, beam, dome structure, and substructure.

Odoo text and image block

PORTFOLIO IN 2016

 Sport Center Design

Producing 3D Modeling and architectural design for a sport center with modern, green, and public interaction concept.

(2016)

Deck Chiller Building Design  

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a frame steel structure for deck chiller. This structure is using SNI, PPURG, ANSI/AISC, EN, LRFD, and JRA as specifications and used as storage materials.

(2016)

  Mezzanine Structure Design Using Honeycomb Beam 

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a steel structure for mezzanine use honeycomb beam. This structure is using SNI, PPURG, ANSI/AISC, EN, LRFD, and JRA as specifications and used as goods storage.

                        (2016) 

Design & Build - Mezzanine Structure with Retrofitting of Existing Column by Steel Jacketing  

Producing Shop Drawing, As Built Drawing, Bill of Quantity and Calculation of a steel structure for mezzanine with retrofitting of existing column by steel jacketing method so that additional structure can be added. This structure is using SNI, PPURG, ANSI/AISC, EN, LRFD, and JRA as specifications and used as goods storage.

(2016)

Widening Road
(From: PT. TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) the widening road/access and pavement design calculation. The code used is AASHTO

(2016)

Debarker Foundation Planning

(From: PT. TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) the dynamic foundation/machine foundation for the debarking machine. The combine block foundation type is used according to ACI specification.

(2016)

Salt Storage Structure & Roof Structure Planning

(From: PT. TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) the steel roof structure with 18m wide span and 24m length using IWF Steel. The code uses are SNI, PPURG, ANSI/AISC, ACI, and JRA

(2016)

Evaporator Tank Foundation Planning

(From: PT. TDI) 

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) the bored pile foundation. The code uses are SNI, PPURG, ANSI/AISC, ACI, and JRA.

(2016)

Landslide Stability Analysis and Slope Protection (Gabion)

(From: PT. TDI) 

Analysis and Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for landslide and slope protection (Gabion). The analysis was used Plaxis software and RSNI Geoteknik as a code specification.

 (2016) 

Machine Foundation Planning for Bark Crusher

(From: PT. TDI) 

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for dynamic foundation / machine foundation for Bark Crusher, tabletop foundation type is used based on code SNI, PPURG, ANSI/AISC, ACI, and JRA. 

Mounting Conveyor Staging & Foundation Planning

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for steel staging for structure mounting conveyor categorized as medium vibration. The code uses for this calculation are SNI, PPURG, ANSI/AISC, ACI, and JRA.  

Bark Crusher Roofing & Foundation Planning

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for steel roof structure with tall column ( >6m ).The code uses for this calculation are SNI, PPURG, ANSI/AISC, ACI, and JRA.   

Bunker & Foundation Planning

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for matt foundation with concrete wall, with special design criteria that the wall is must strong enough to hold impact load from excavator bucket manuver.The code uses for this calculation are SNI, PPURG, ANSI/AISC, ACI, and JRA.   

(2016)

Additional MCC Room Composite Structure Planning

(From: PT. TDI) 

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for additional structure above the existing structure, design as composite structure type, with steel column, beam and deck plate are covered by concrete The code uses for this calculation are SNI, PPURG, ANSI/AISC, ACI, and JRA

(2016) 

PC Sheet Pile Planning

(From: PT. TDI) 

Analysis and Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for landslide and slope protection ( sheet pile ), code uses are RSNI Geoteknik

 SNI, PPURG, ANSI/AISC, ACI, and JRA.

(2016)

Truckscale Foundation Planning

(From: PT. TDI) 

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for truckscale foundation, combination between pilecap and deep foundation. The code uses are for this calculation are SNI, PPURG, ANSI/AISC, ACI, and JRA 

(2016)

Truckscale Facilities Control Room Planning

(From: PT. TDI) 

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for control room building, the building material consists of concrete and steel.  SNI, PPURG, ANSI/AISC, ACI, and JRA.

(2016)

Truckscale Facilities Laboratory Building Planning

(From: PT. TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for control room building, the building material consists of concrete and steel.  SNI, PPURG, ANSI/AISC, ACI, and JRA.

Truckscale Facilities Log Checker

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for roof building  SNI, PPURG, ANSI/AISC, ACI, and JRA.

(2016)

Supports Access Road Planning in Indonesia

(K-Wk Joint Project)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) of temporary building for bridge support, concrete barrier, and foundation based on code  SNI, PPURG, ANSI/AISC, ACI, and JRA. And site visit    

 

Warehouse Renovation

(from : TASSI)

Warehouse Reparation. Application of BIM with Construction Management to manage cost efficiency (Cost), suitability of execution time (Time), and quality monitoring (Quality).

(2016)

Odoo text and image block

PORTFOLIO IN 2015 

 

Chipper Building Planning

(From: PT. TDI)

Planning for a warehouse planned as steel structure and supported by the direct foundation. The code uses are SNI, PPURG 1987, ANSI/AISC, and JRA for unit weights of material.

(2015) 


Chipper Foundation Planning

(From: PT. TDI)

Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for dynamic foundation planned as a direct foundation model with the deep pile. Code uses are RSNI Geoteknik and SK SNI T–15–1991–03.

(2015)

 



Debarker Direct Foundation with Pile & Hydraulic Crane Foundation Planning

(From: PT. TDI)

  Planning (Basic Drawing, Detailed Drawing, Bill of Quantity, and Calculation Report) for dynamic foundation planned as a direct foundation model with the deep pile. Code uses are RSNI Geoteknik and SK SNI T–15–1991–03.  

(2015) 

Gutter Work Installation

(From: PT. Sp)
Odoo text and image block

PORTFOLIO IN 2014 

Odoo image and text block

Sp Factory Design and Build

(from : SPI)

Building and construction planning of plastic pellets processing factory in Cikarang, West Java. Application of BIM with Construction Management to manage cost efficiency (Cost), suitability of execution time (Time), and quality monitoring (Quality) to make sure everything goes according to plan

(April 2014)

Odoo text and image block
Odoo image and text block

Tv One (GBKP & Syalom Chruch)

3D Modeling for GBKP dan Syalom chruch located in North Sumatera and Kupang

(April 2014)

Tv One (Puskesmas Kediri & Puskesmas Indramayu)

Building Renovation of Puskesmas in Kediri and Indramayu.

(April 2014)

Odoo text and image block
Odoo image and text block

Tv One (Mosque in Tanah Karo Medan & Islamic Boarding School in Malang)

Mosque Building Renovation in Tanah Karo, Medan and Islamic boarding school in Malang

(April 2014)

Tv One (Elementary School in Jepara & Elementary School in Tanah Karo Medan)

Elementary Schoo Building Renovation in Jepara and Tanah Karo Medan

(April 2014)

Odoo text and image block
Odoo image and text block

DISKAMTAM (Office Building Construction)

Construction Planning of Government Office Building and management.

(April 2013)

DISKAMTAM (Office Building Construction)

Construction Planning of Government Office Building and management.

(April 2013)

Odoo text and image block

PORTFOLIO IN 2013 

Odoo image and text block

Padang University

Renovation of University in 3D model.

(April 2013)

Padang University

Renovation of University in 3D model.

(April 2013)

Odoo text and image block
Odoo image and text block

Kampung Sygma

Planning and supervision of housing cluster construction in Bandung hills. (Augusts 2013)

Buahbatu Mosque

Construction planning of 2 level floor mosque in Buahbatu, Bandung.

(November 2013)

Odoo text and image block

PORTOFOLIO IN 2012

Odoo image and text block

JAATS (JAKARTA AUTOMATED AIR TRAFFIC SERVICE)

(from : Indonesia Ministry of Transportation)

Salah satu pusat kendali udara Indonesia yang berlokasi di Jakarta. Daerah JAATS terdiri dari lima bangunan utama yang dirancang dalam konsep Green and Smart Building.

(Januari 2012)

OKATOS – INTERIOR DESIGN

(from : PT Oka)

Desain Interior untuk kantor yang minimalis di Bandung.

(April 2012)

Odoo text and image block
Odoo image and text block

Nis FACTORY DESIGN

(from : Ark - Nis INDONESIA)

Perencanaan bangunan pabrik karet dan konstruksi di Rancaekek Jawa Barat. Revit dan Naviswork keduanya digunakan dalam tahap perencanaan serta tahap konstruksi untuk memastikan semuanya berjalan sesuai rencana.

(November 2012)

Y PROJECT

(from : JAPAN)

Peningkatan visualisasi langkah pembangunan jalan.

(Desember 2012)

Odoo text and image block

PORTFOLIO IN 2009 

Odoo image and text block

HOUSEI

(from : FO,Japan)

Visualisasi dengan 3D lapangan sepak bola.

(Januari 2009)

TUNNEL CONDITION

(from : K Corp., Japan)

Visualisasi dengan 3D kondisi sebuah terowongan beserta kelengkapan keamanannya.

(Maret 2009).

Odoo text and image block
Odoo image and text block

R HOTEL

(from : L-Man PropertyService, Indonesia)

Visualisasi rencana renovasi dan pengembangan sebuah hotel.

M PRO

(from : K Corp.,Japan)

Visualisasi dengan 3D perencanaan pembangunan sebuah tangga sementara dalam pengembangan sebuah stasiun kereta api yang digunakan untuk penjelasan kepada masyarakat.

(April 2009)

Odoo text and image block
Odoo image and text block

MILII SALON & BAKERY

(from : Ho,Indonesia)

Desain sebuah rumah tinggal yang digabung dengan sebuah rumah usaha (salon dan bakery). Sebuah konsep yang menawarkan hasanah dan keharmonisan antara Living& Working.

PORTFOLIO IN 2008 

Odoo image and text block

ALGERIA ROADWAY

(from : O. Co. Ltd.,Japan)

Visualisasi desain sebuah jalan raya di Algeria.

H RESIDENCE

(from : HRD, Indonesia)

Visualisasi desain rumah tinggal bertema tropis.

(September 2008)

Odoo text and image block
Odoo image and text block

CIMENYAN HOUSE

(from : HO,Indonesia)

Desain dan visualisasi rumah tinggal di daerah perbukitan dengan metode Virtual Reality. (Desember 2008)

NIIGATA HOUSE

(from : FPC, Co., Japan)

Desain rumah tinggal dengan konsep modern yang diperlombakan dalam sebuah ajang kontes diJepang.

Odoo text and image block

PORTFOLIO IN 2007 

Odoo image and text block

PRE-STRESSEDSTRUCTURE

(from N, Japan)

Perencanaan perubahan dinding sebuah tangki gas berukuran raksasa diKorea.

JEMBATAN

(from : FPC, Co., Japan)

Visualisasi 3D konstruksi jalan dan jembatan pada daerah pegunungan dengan struktur baja dan beton.

Odoo text and image block
Odoo image and text block

CEBU

(from : FPC, Co., Japan)

Visualisasi 3D jalan raya di Cebu, Filipina.

 


Odoo text and image block
Odoo image and text block

ASAKA

(from : T Co. Ltd.,Japan)

Visualisasi 3D desain perbaikan jalan dan kawasan sekitar stasiun dengan menggunakan teknik penggabungan foto.

PORTFOLIO IN 2006

JOUNAN

(from : K Corp.,Japan)

Perencanaan dan perhitungan anggaran untuk sebuah area bangunan pengolahan limbah di kawasan Jounan, Jepang.

Odoo text and image block
Odoo image and text block

T PRO

(from : T Co. Ltd.,Japan)

Visualisasi dengan 3D alur pengerjaan konstruksi jalan raya bawah tanah.

NARIMASU

(from : K Corp.,Japan)

Visualisasi dengan 3D rencana perbaikan stasiun kereta api berikut tata letak bangunan serta ruang pengelola stasiun didaerah Narimasu,Tokyo Jepang..

Odoo text and image block

PORTFOLIO IN 2005 

Odoo image and text block

APARTEMEN

(from : FPC, Co., Japan)

Visualisasi hasil akhir pembangunan sebuah apartemen diperkotaan Jepang.

GEDUNG DATARAN TINGGI

(from : FPC, Co., Japan)

Visualisasi perencanaan step penggalian tanah,pembuatan jalan sampai pelaksanaan fisik bangunan.

Odoo text and image block
Odoo image and text block

N PRO

(from : N, Japan)

Visualisasi alur skenario pengangkatan instrumen lama tanpa mengganggu kinerja manhole yang sudah ada dengan teknik 3DVirtual.

PORTFOLIO IN 2004 

HAIKINZU

(from : FPC, Co., Japan)

Menggambarkan struktur pembesian dan tampilan lapisan beton dan tulang besi.

Odoo text and image block
Odoo image and text block

3D PARTS

(from : K Corp., Japan)

Pembuatan modeling 3D kendaraan termasuk kendaraan ringan seperti golf cart hingga kendaraan berat seperti buldoser.

TOUBU NERIMA

(from : K Corp.,Japan)

Pendataan secara 3D jaringan pipa saluran airbersih dan kotor serta kabel listrik, telepon dan lainnya yang terdapat dibawah tanah area stasiun Toubu Nerima, Tokyo Jepang.

Odoo text and image block
Odoo image and text block

TOCHIGI COUNTRY CLUB

(from : K Corp., Japan)

Perencanaan landscape lapangan golf dan modifikasi tempat penyeberangan jalan untuk golf cart melalui lorong bawah tanah.

OMOIGAWA

(from : K Corp.,Japan)

Perencanaan pembuatan jembatan dan rel kereta api dengan struktur jembatan menggunakan beton dan tambahan baja untuk pagar pembatas jembatan sepanjang area sungai.

Odoo text and image block
Odoo image and text block

S OFFICE

(from : K Corp. Architect Div., Japan)

Tampilan hasil capaian akhir pembangunan sebuah gedung perkantoran dengan 3D.

LABORATORIUM MATA

(from : K Corp. Architect Div., Japan)

Perencanaan renovasi dan penambahan area gedung laboratorium sebuah rumah sakit mata di Jepang.

Odoo text and image block
Odoo image and text block

N COUNTRY CLUB

(from : T Co. Ltd.,Japan)

Perencanaan landscape sebuah lapangan golf disebuah kawasan di Jepang.

MORO

(from : K Corp.,Japan)

Perencanaan urugan dan galian tanah dalam pembangunan sebuah rumah sakit di daerah Moro, Jepang.

Odoo text and image block
Odoo image and text block

MOROBYOUIN

(from : K Corp., Japan)

Visualisasi image 3D hasil akhir untuk rumah sakit didaerah Moro, Jepang.

LANTAI KERJA

(from : K Corp.,Japan)

Visualisasi hasil perhitungan struktur sederhana untuk lantai kerja..

Odoo text and image block
Odoo image and text block

FURUSUMIDA

(from : K Corp., Japan)

Visualisasi hasil akhir pembaharuan daerah aliran sungai di kawasan Furusumida, Jepang.

JEMBATAN

(from : FPC, Co., Japan)

Visualisasi dengan 3D struktur jembatan untuk pelintasan jalur kereta api, menggunakan sistem rangka baja H dan pondasi beton.

Odoo text and image block
Odoo image and text block

KONTUR TANAH GALIANDAN URUGAN

(from : FPC, Co., Japan)

Menggambarkan kondisi tanah galian dan urugan untuk di dirikan sebuah bangunan di atasnya pada daerah tanah perbukitan.

GOLF RANGE

(from : T Co. Ltd.,Japan)

Visualisasi hasil akhir renovasi tempat latihan

Odoo text and image block
Odoo image and text block

TEROWONGAN

(from : KM Engineering,Japan)

Desain dan perhitungan dinding muka sebuah terowongan di Jepang

I OFFICE

(from : K Corp. Architect Div., Japan)

Visualisasi sebuah gedung perkantoran di Jepang dengan menggunakan 3D..

Odoo text and image block
Odoo image and text block

TOUBU SHIELD

(from : N, Japan)

Visualisasi bangunan tempat pengolahan limbah serta saluran pipa-pipa untuk proses pengolahan limbah tersebut.

OYAMADAI HOUSE

(from : House Owner,Japan)

Desain rumah tinggal disebuah kawasan erumahan Jepang.

(Desember 2004)

Odoo text and image block
Odoo image and text block

NIIGATA

(from : K Corp., Japan)

Visualisasi dengan 3D untuk skenario akhir pelaksanaan konstruksi di lapangan untuk efisiensi di lapangan.

(Desember 2004)

AGATSUMA LINE

Visualisasi dengan 3D kontur tanah untuk mengetahui bagian cut &fill serta perencanaan pelaksanaan di lapangan.

(Desember 2004)

Odoo text and image block
Odoo image and text block

MUSASHINO LINE

(from : K Corp., Japan)

Perencanaan dengan 3D pemindahan jalur kereta api sementara selama prosesperbaikan jalur, arus lalulintas kereta api tidak terganggu jadwalnya.

(Desember 2004)

OMOIGAWA-JR LINE

(from : K Corp.,Japan)

Perencanaan struktur fondasi penopang jembatan kereta api disungai Omoigawapropinsi Tochigi-Jepang.

(Desember 2004)

Odoo text and image block
Odoo image and text block

TUTTO CAFÉ, JAPAN

(from : CO, Japan)

Desain interior sebuah cafe di lengkapi dengan permainan darts di TokyoJepang. (Desember 2004)

PERENCANAAN JANGKA PANJANG PENGOLAHAN LIMBAH

(from : KM Engineering,Japan)

Visualisasi perencanaan sebuah bukit sebagai Tempat Pembuangan Akhir (TPA) sampah perkotaan yang pada akhirnya akan diubah menjadi sebuah sarana rekreasi dan olahraga yang bersahabat dengan lingkungan.

(Desember 2004)

Odoo text and image block